Unboxing
This quadcopters packaging is unlike any other drone ive come across, once the lid has been pulled off the internal box flaps pull down revealing all technical specs on one side and the other 3 contain some photogenic shots of the copter itself. The 2 plastic beds stacked on top of each other contain the quad and underneath the accessory bags and transmitter, the box also contains the following:-
1 x Quadcopter
1 x Transmitter
4 x Propellers
4 x Spare Propellers
1 x USB battery charger
1 x Screwdriver
1 x mini bag of screws
2 x Landing sprigs
1 x Camera
4 x Propeller guards
Assembly
The quad only needs a few parts attached, these parts are:-
4 x Propellers
2 x Landing Sprigs
1 x Camera
4 x Propeller guards
Once all parts are attached you will be ready to charge the battery, this takes 30-45 minutes for a 8 minute flight time.
Flight
The copter seems very stable when it takes off under lowest power setting, it flies to a good altitude quite quickly and
stays there happily, when you switch the power upwards to intermediate the drone still handles well. Its when you switch up to the highest mode (3 beeps) the left and right turning starts to get quite shaky and at speed it doesn’t feel as if full control is had, but at no point did the quad fall out of the sky or drop significantly while turning.
The attached camera gives ok video, there isn’t much jello and the picture isn’t too whitewashed. If the camera is left recording video then the flight time of the quad is 6 minutes, without or with occasional photos then 7-8 minutes.
Overall 7/10
POSITIVES = Stylish design, fantastic transmitter, adjustable speed is best to fly on intermediate almost silent operation
NEGATIVES = Shaky turning, doesn’t seem powerful enough, camera drains battery fast.
Links to Buy
Amazon
No comments:
Post a Comment